Linux 硬盘分区格式化_绿色软件之家

您当前所在位置：首页 → 操作系统 → LINUX → Linux 硬盘分区格式化

Linux 硬盘分区格式化 时间：2015/6/28来源：绿色软件之家作者：网管联盟我要评论(0)

    [root@NAT ~]# fdisk -l
    Disk /dev/sda: 200.0 GB, 200049647616 bytes
    255 heads, 63 sectors/track, 24321 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot      Start   End      Blocks   Id System
    /dev/sda1   *     1    25      200781   83 Linux
    /dev/sda2 26 2575    20482875   83 Linux
    /dev/sda3      2576 5125    20482875   83 Linux
    /dev/sda4      5126 24321   154191870    5 Extended
    /dev/sda5      5126 6400    10241406   83 Linux
    /dev/sda6      6401 6655     2048256   82 Linux swap / Solaris
    /dev/sda7      6656 24321   141902113+ 83 Linux
    Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes //未分区的硬盘，sdb 1500GB
    255 heads, 63 sectors/track, 182401 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Disk /dev/sdb doesn't contain a valid partition table

    [root@NAT ~]# fdisk /dev/sdb
    Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
    Building a new DOS disklabel. Changes will remain in memory only,
    until you decide to write them. After that, of course, the previous
    content won't be recoverable.

    The number of cylinders for this disk is set to 182401.
    There is nothing wrong with that, but this is larger than 1024,
    and could in certain setups cause problems with:
    1) software that runs at boot time (e.g., old versions of LILO)
    2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
    Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
    Command (m for help): m
    Command action
a   toggle a bootable flag
b   edit bsd disklabel
c   toggle the dos compatibility flag
d   delete a partition
l   list known partition types
m   print this menu
n   add a new partition
o   create a new empty DOS partition table
p   print the partition table
q   quit without saving changes
s   create a new empty Sun disklabel
t   change a partition's system id
u   change display/entry units
v   verify the partition table
w   write table to disk and exit
x   extra functionality (experts only)
    Command (m for help): n
    Command action
e   extended
p   primary partition (1-4)
    p
    Partition number (1-4): 1
    First cylinder (1-182401, default 1):
    Using default value 1
    Last cylinder or +size or +sizeM or +sizeK (1-182401, default 182401): 80000
    Command (m for help): n
    Command action
e   extended
p   primary partition (1-4)

#p#副标题#e#

    p
    Partition number (1-4): 2
    First cylinder (80001-182401, default 80001):
    Using default value 80001
    Last cylinder or +size or +sizeM or +sizeK (80001-182401, default 182401):
    Using default value 182401
    Command (m for help): m
    Command action
a   toggle a bootable flag
b   edit bsd disklabel
c   toggle the dos compatibility flag
d   delete a partition
l   list known partition types
m   print this menu
n   add a new partition
o   create a new empty DOS partition table
p   print the partition table
q   quit without saving changes
s   create a new empty Sun disklabel
t   change a partition's system id
u   change display/entry units
v   verify the partition table
w   write table to disk and exit
x   extra functionality (experts only)
    Command (m for help): l
     0 Empty     1e Hidden W95 FAT1 80 Old Minix be Solaris boot
     1 FAT12     24 NEC DOS   81 Minix / old Lin bf Solaris
     2 XENIX root      39 Plan 9&nbs

关键词标签：Linux,硬盘分区,格式化

相关阅读

文章评论

查看所有0条评论>>